2024 Radar Senate Probuild w/ Vector + ARTP Radar Shop Online

---

Waterski Features

Rocker

• Continuous Rocker – A continuous rockerline through the tip and tail of the ski provides a considerably more stable and forgiving feel in transitions from edge to edge in the build-up to the apex of your cut, while without a flat spot, there is no longer a pivot point allowing for reduced sticking points and allows for consistency and comfort both on your on and off-side
• Increased Flat Spot – Increased the sweet spot from your front foot to halfway down the back, providing a bigger sweet spot, a more predictable feel from your ski, providing greater drive through the ski, and increased hold and angle in turns.

Flex

• Flex Rating(1=Soft, 10=Stiff) – 10/10, (this guys a winner)

Core

• Secret ProBuild core – The not-so-secret ProBuild core is a PMI machine molded core specifically designed to be light and responsive like other high-end cores and offer an unparalleled amount of feel, giving any skier all the feedback they need on the water.
• Carbon Rods – Optimising the flex in the ski’s turning so you can pivot and drive out of turn like a race car

Laminates

• TeXtreme Carbon – A bi-directional Carbon layer that uses wider, flatter carbon taping allowing for the ultimate strength and torsional rigidity
• Innegra Technology -A rubber dampening layer placed under the later of carbon allows for energy distribution, in return reducing vibration

Shape

• 2/10″ Wider than Vapor – This Vapor inspired Senate takes everything you could imagine from the Vapor and adds 2 tenths of an inch to the width to add that little bit of stability and give it greater float at slower speeds
• Steeper Hybrid Bevel – This sharp blended bevel allows for greater ability to lean into turns for more angle while providing greater deceleration into the turn and a tighter radius at the top of your cut
• Wider For-body – an increase in width in the for-body of the ski not only creates stability but also allows you to stand over the top of the ski with more confidence before heading into your turns
• Reduced Tail Width – Allows the ski to drift in the tail mid-turn and stay planted all at once, giving you more angle in your turn.

Concave

• Full Edge to Edge Concave – a full concave throughout the whole width of the ski creates a fluid motion and greatly supports your cut, giving you the ability to focus on where you want to place the ski.
• Depth – Increased depth throughout the entire length of the ski creates more lift and support while also adding greater volume; this, in turn, translates to greater push on the outer bevels of the ski and an easier ability to pivot into your edges and a tighter turn radius

Other Features:

• Switchblade Adjustable Fin
• Tru-Line Boot and Fin Inserts

Level

• Riding Ability: Intermediate/Advanced
• Ski Type: Cross-Over
• Ski Speeds: 28-34Mph

Size

• (65″) –  Up to 77Kgs
• (67″) –  73-91Kgs
• (69″) – 82-100Kgs

Warranty

• 1 Year Manufacturer Warranty

Boot Features

Flex

• Mid Flex

Liner & Lacing

• Symmetrical Footbed – Whether your left or right foot forward, you will be able to have increased comfort
• Medium Density Footbed – Provides increased response and comfort
• Double Lacing for convenience
• Wrap Tech Level 1

Baseplate

• Feather Frame Chassis – Reduces Weight and creates a more natural flex in line with the ski.

Additional Features

• Single 3D Molded Tongue
• Stitch Lines to stop delamination

Warranty

• 1 Year Manufacturer Warranty